Buffalo hunter style Bowie The blade for this knife is made from W-1 high carbon tool steel, the blade lenght is 180mm, it is 5.5mm thick on the spine. The blade flats have been left rough forged and the primary bevels and the spine have had a forced mustard etch patina applied. The overall length of the knife is 300mm. The handle scales are made from stabilised giraffe bonewhich are held with two S/S Corby bolts. The… View More
The blade for this knife is made from L-3 high carbon tool steel, the blade has been gun blued, it is 180mm long, is 5.5mm thick on the spine and the overall length of the knife is 305mm. The double branched hand guard and handle bolster are made from gun blued carbon steel, the handle bolster is held in place with a recessed brass barrel nut. The handle is the standard stacked leather washer design which has been dyed mahogany brown and the… View More
The blade for this knife is made from W-1 high carbon tool steel, it has a blade length of 178mm, a blade thickness of just over 5.5mm and the overall length of the knife is 305mm. The blade has been coated with clay and quenched in water to produce a quite vivid Hamon. The handle scales are black canvas Micarta with red liners, held with two stainless Corby bolts, one three milimeter stainless pin and a stainless thong tube. The double… View More
The fullered blade for this spear point Bowie is made from W-1 high carbon tool steel, with a blade length of 255mm, a blade thickness of 5mm on the spine with a 130mm false unsharpened clip on the top edge. The overall length of the knife comes in at 380mm, with a hand guard, grooved bolster and grooved end cap made from 316 stainless steel. There are three coined nickel silver spacers and the handle is made from a beautiful piece of… View More
This new series of chef's knives are called the Oyabun, which is the name given to a Yakuza boss and these will certainly be the boss of any task you perform in the kitchen. They will be a standard style and size and will come with the same shaped handles. The core blade steel will be 26C3, which is a very pure high carbon tool steel which is capable of taking and holding a very fine and sharp edge. The outer cheeks are made from mild steel… View More
Stephen Nowacki | Founder and Director
